AlcoMate-Prestige-AL6000-Silver-Basic-Breathalyzer-

Home > How A Breathalyzer Works >

AlcoMate Prestige (Silver) "Basic Pack"

AlcoMate Prestige Breathalyzer - accurate, convenient, great price!

The AlcoMate Prestige "Basic Pack" Super Deal #1 Includes:

The Lowest Price
5 FREE Mouth Pieces
1 Pre-Installed "User-changeable" Sensor Module

plus FREE 2-DAY AIR Shipping!

Our Price: $119.95

Sale Price: $109.95

You save $10.00!

Product Code: AL6000SB

Qty:

Description

Technical Specs

Extended Information

The AlcoMate Prestige is the first breathalyzer to feature a "Replaceable" Pre-Calibrated Alcohol Sensor Module. It can be replaced by the consumer without the need to send the breath alcohol tester back to a service center. Most breathalyzers must be shipped back to the manufacturer every six to twelve months to be re-calibrated. The AlcoMate Prestige eliminates this costly and time-consuming annual event by offering "Do-It-Yourself" Replaceable Sensor Modules.

Using the AlcoMate Prestige to check your Blood Alcohol Content (BAC) is simple. Just turn it on and wait for the "beep" then blow into the mouth-piece until you hear another "beep" (about five seconds). In just a few seconds the results are displayed and a red warning light flashes if your blood alcohol level is over 0.05 %.

The AlcoMate Prestige Basic Pack includes the Breathalyzer, (2) AA Batteries, (5) Mouthpieces, a Carrying Pouch, a Handstrap, and a Users Manual.

Approved/Certified by the DOT, NHTSA, US Coast Guard and FDA. Law Enforcement Grade.

What is a "Pre-Calibrated Replaceable Alcohol Sensor Module"?

AK Solutions is the first breathalyzer company to introduce pre-calibrated replaceable modules (patent-pending) to the market. One of the main problems with using breathalyzers in critical applications is that the alcohol sensor, no matter what type, requires periodic re-calibration.

Unfortunately, the re-calibration process requires that the breathalyzer be physically mailed or taken to a professional service center, at which point the device must be evaluated and proper steps must be taken for calibration with an expensive simulator system. The process is costly for both consumer and service center, and the delay of processing and shipping back-and-forth can be quite a loss.

The "Pre-Calibrated Replaceable Alcohol Sensor Module" can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

Benefits of using Pre-Calibrated Alcohol Sensor Modules

NO CALIBRATION EVER!
No Delay means No Downtime
No Residue Buildup (Which Calibration Service Cannot Remove)
Replacing the Sensor Module means Restoring the Device as Brand New

Here's how to install a new sensor module in the AlcoMate Prestige (click on image to enlarge):

IMPORTANT: Before inserting the new sensor module, you should leave your device powered off, with the old sensor module and batteries removed for at least 5 minutes.

For the AlcoMate Prestige please take the following steps to install a new sensor module (Click on the images for larger versions):

Prepare your AlcoMate Prestige.	Use a flat, sharp tool to carefully open the top cover.	Lift the breath tube to access the sensor module.
Remove the breath tube. It should remove easily.	Carefully raise the sensor module from the body. Do NOT detach the cable from the body.	Remove the cable from the slot underneath the sensor module.
Prepare a new pre-calibrated sensor module.	Insert the cable into the new sensor. Make sure the blue strip is toward the sensor, as shown.	Replace the sensor module into its original position.
Re-attach the breath tube directly on to the sensor. Make sure the front opening is aligned.	Re-attach the cover on to the top of the body. It should snap in fairly easily.	Ready for Testing!