You are here: Home > Why You Need A "Replaceable" Sensor
Breathalyzer Buyer Beware!
Avoid This Critical Breathalyzer Pitfall When Buying A Breathalyzer

Almost All Breathalyzers Require Factory Re-Calibration Every 6 to 12 Months. Failure to do so can lead to a grossly inaccurate breathalyzer test which can lead you to jail...or worse!

But... there is an easy solution to this royal, pain-in-the-butt problem.

     One of the main problems with using breathalyzers is that the alcohol sensor, no matter what type, requires periodic re-calibration.  To maintain accuracy almost every breathalyzer for sale in the US requires re-calibration about every 6 to 12 months! 

     Unfortunately, the re-calibration process requires that the breathalyzer be physically shipped back to the manufacturer or taken to a professional service center, at which point the device must be evaluated and then re-calibrated back to original factory specs. The process is costly and the delay of processing and shipping back and forth can be quite a loss.

       Finally there is a solution.

    The AlcoMate Premium AL7000 breathalyzer eliminates the delays and complications of re-calibration
.  It incorporates a "Pre-Calibrated User-Replaceable Alcohol Sensor Module" that allows you to simply "snap out" an old module and "snap in" a new one. You can get back to reliable, accurate testing in a matter of seconds!

Here are some of the benefits of using a breathalyzer with a  Pre-Calibrated Alcohol Sensor Module:

    * NO CALIBRATION EVER!
    * No aggravation of packing and shipping your breathalyzer
    * No Delay and No Downtime
    * No Residue Buildup (Which Calibration Service Cannot Remove)
    * Replacing the Sensor Module means restoring it to "brand new" condition assuring accurate breathalyzer results

Introducing PRISM Sensor Technology

     The new AlcoMate Premium AL7000 is the most advanced, accurate and convenient breath alcohol testor available. Check any breathalyzer reviews and you will find the AL7000 rated at or near the top.

     It is now easier than ever to change the sensor due to the the Easy-Replace Sensor Panel on the back of the breathalyzer. It takes only about 30 seconds! PRISM Technology is only available with the AlcoMate Premium Breathalyzer.