AlcoMate-Prestige-Sensor-Module-GREEN

Home > AlcoMate Prestige AL6000 >

AlcoMate Prestige (AL6000) GREEN Sensor Module

AlcoMate Prestige Sensor Module - eliminates the inconvenience of factory recalibration.

Alternative Views:

Our Price: $29.95

Product Code: SM6G

Qty:

Description

Extended Information

The AlcoMate Prestige GREEN Sensor Module is a consumer replaceable unit for AlcoMate Prestige breathalyzers purchased before October 2007*. Once you learn how to do it, it only takes a few minutes to remove the old sensor and install a new one. You'll save the cost and aggravation of sending your breathalyzer back to the manufacturer every six to twelve months for recalibration. It helps ensure that your AlcoMate Premium breathalyzer is always accurate and ready to use when you are.

For step by step illustrated instructions on how to change the AlcoMate Prestige Sensor Module please "click" the "extended information" tab above. If total ease in changing the sensor module is your goal then consider buying the AlcoMate Premium.

*Note: If you purchased your AlcoMate Prestige between October and December of 2007 you must verify whether you have a GREEN or RED sensor module. This can be done by examining the sensor module's circuit board color through the rear air vent on top of the device. Please call us at 610-584-9000 if you have any questions.

What is a "Pre-Calibrated Replaceable Alcohol Sensor Module"?

AK Solutions is the first breathalyzer company to introduce pre-calibrated replaceable modules (patent-pending) to the market. One of the main problems with using breathalyzers in critical applications is that the alcohol sensor, no matter what type, requires periodic re-calibration.

Unfortunately, the re-calibration process requires that the breathalyzer be physically mailed or taken to a professional service center, at which point the device must be evaluated and proper steps must be taken for calibration with an expensive simulator system. The process is costly for both consumer and service center, and the delay of processing and shipping back-and-forth can be quite a loss.

The "Pre-Calibrated Replaceable Alcohol Sensor Module" can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

Benefits of using Pre-Calibrated Alcohol Sensor Modules

NO CALIBRATION EVER!
No Delay means No Downtime
No Residue Buildup (Which Calibration Service Cannot Remove)
Replacing the Sensor Module means Restoring the Device as Brand New

Here's how to install a new sensor module in the AlcoMate Prestige (click on image to enlarge):

IMPORTANT: Before inserting the new sensor module, you should leave your device powered off, with the old sensor module and batteries removed for at least 5 minutes.

For the AlcoMate Prestige please take the following steps to install a new sensor module (Click on the images for larger versions):

Prepare your AlcoMate Prestige.	Use a flat, sharp tool to carefully open the top cover.	Lift the breath tube to access the sensor module.
Remove the breath tube. It should remove easily.	Carefully raise the sensor module from the body. Do NOT detach the cable from the body.	Remove the cable from the slot underneath the sensor module.
Prepare a new pre-calibrated sensor module.	Insert the cable into the new sensor. Make sure the blue strip is toward the sensor, as shown.	Replace the sensor module into its original position.
Re-attach the breath tube directly on to the sensor. Make sure the front opening is aligned.	Re-attach the cover on to the top of the body. It should snap in fairly easily.	Ready for Testing!

Browse for more products in the same category as this item:

AlcoMate Prestige AL6000
Breathalyzer Accessories

Breathalyzers

Breathalyzer Info